APEGBC - Professional Engineers and Geoscientists of BC
Become a Member
Become a Member
Become a Member
Become a Member
How to Apply
Apply for Membership or Reinstatement
Check Application Status
Good Character Requirement and Registration Hearings
Competency Experience Reporting System
Professional Engineering and Geoscience Practice in BC Online Seminar
Professional Geoscience Mobility Agreement
Professional Practice Examination
Request a Consultation
1. I am a member with another Engineering/Geoscience Canadian Association, how do I become registered with APEGBC?
Being a current member or licensee with another Canadian Association/Ordre allows you to more easily gain membership with APEGBC. Becoming a member or licensee with APEGBC does not affect your status with other Canadian Associations/Ordre.
More information and links to our online application can be found on our
2. What address and to whom do I direct my academic documents?
Official transcripts should be sent directly to the APEGBC office addressed to the Registration Department.
The address of our office is 200-4010 Regent Street, Burnaby BC V5C 6N2.
3. I have completed my degree outside of Canada, how do I have my degree evaluated for membership with APEGBC?
To apply for registration you are required to have the equivalent of graduation from a four year full time bachelors program in applied science, engineering, geoscience, science or technology.
If you do not meet the minimum academic requirements for P.Eng/PGeo, you may meet the requirements for
In Canada there are no accredited geoscience degrees recognized by Geoscience Canada. All applicants applying in geoscience are evaluated against the appropriate
when they submit an application and fee to APEGBC.
In Canada there are accredited engineering degrees recognized by Engineers Canada, Engineering degrees are evaluated by APEGBC as either accredited or non-accredited. Detailed evaluations are completed once an application and fee are received by APEGBC.
You may be granted exemption from examinations if:
You have an undergraduate engineering degree recognized by an engineering accreditation body that has a Mutual Recognition Agreement with APEGBC :
(Must be in the list of signatories) and
Commission des Titres d’Ingénieur (CTI)
You have an undergraduate engineering degree and an approved postgraduate engineering degree in the same discipline as that of your undergraduate engineering degree.
You have an undergraduate engineering degree and at least five years of engineering experience or you have graduated from an ECSA-accredited program (South Africa) prior to 1999. The decision to grant a reduction or an exemption is based on the results of a one-hour interview held at the APEGBC office.
You have an undergraduate degree or equivalent in applied science, engineering, geoscience, science or technology; and have written and passed the U.S. Fundamentals of Engineering and the Principles and Practice of Engineering exams in the discipline of registration for which you are applying. You will be required to have the State Board you passed the exam with to send confirmation to APEGBC you have passed this exam.
You have an undergraduate or post graduate engineering degree from a program on APEGBC's list of
Non-Accredited Reputable International Programs.
APEGBC offers a
for engineer applicants on our website. Based on academic and experience background the tool will determine whether an applicant should pursue a career in applied science technologist/technician field or as a professional engineer.
4. I am not sure whether to register as a Member-in-Training first or apply for Professional Membership directly. What are my options?
If you have a minimum of four years of professional work experience in engineering (to apply for P.Eng.) or in geoscience (to apply for P.Geo.) you are permitted to apply for professional licensure. It is not a requirement that you apply for member-in-training first.
If you apply for professional membership you will need to have met the academic, experience, Law and Ethics and PPE requirements before you are licensed. If you apply for member-in-training status you will be enrolled once you meet the academic requirements.
page for more information about applying for membership.
To learn more about applying for the Member-in-Training (MIT) program, please visit our
5. What document do I need to submit and how do I certify my citizenship?
This document requirement can be fullfilled with either a birth certificate, Canadian Citizenship or Permanent Resident card or the photo page of your current passport certified as a true copy.
To have a copy certified, make a photocopy of your document (citizenship card, birth certificate or current passport) and ask a P.Eng., P.Geo., P.E., or Notary Public to sign and stamp it as a "true copy of the original".
Alternatively, you may bring your original document and a photocopy of the document to the APEGBC office to have it certified. If you cannot come in person, you can send a third party to bring in your original document, photocopy to be certified and a signed letter authorizing the individual to provide the documentation on your behalf.
6. I have completed/will be completing the Professional Engineering and Geoscience Practice in BC Online Seminar. Am I still required to complete the Professional Practice Examination?
Yes, the Professional Practice Examination (PPE) and the Professional Engineering and Geoscience Practice in BC Online Seminar both need to be completed in order to obtain your professional membership. Also, completing the online seminar will not automatically register you to write the PPE, you will need to register to write the exam via our
Although the Professional Engineering and Geoscience Practice in BC Online Seminar may be helpful in preparing for the exam, it is
meant to replace the
recommended study materials
.The examination is based on this material and it should be reviewed prior to challenging the exam.
7. I have applied for the Professional Practice Examination with my preferred date, time and location. When will I receive my confirmed date, time, and location from your exam provider?
The exam provider will be in touch with you approximately a month prior to your exam sitting.
The email sent to you will contain instructions regarding your examination and a confirmed date, time, and location. Please check your spam and junk folders before contacting APEGBC to inquire about your letter.
A best effort is made to match you with your preferred exam date, time and location however this is not guaranteed. If you have questions or concerns about the time or date of your exam you should contact the exam provider directly.
8. I am using the Competency System to report my competencies, my Validator hasn’t received the email notification, what should I do?
Notifications can be resent by going to our
and requesting that the notification be resent. Please note this page is meant to assist validators when requesting links be resent, if you are an applicant requesting a link be resent to your validator you must enter their email address on this page.
Validators should check their email Spam folder to ensure their notification email has not been filtered.
If the Validator still cannot find their notification email after you have resent it and they have checked their Spam folder, send a request to
with the name of the validator and your request.
9. I am using the Competency System to report my competencies and my Validator wants me to make edits but I can’t make any changes. What should I do?
Please send an email to
with your full legal name, system ID and provide the specific competency number.
We can unlock it on our side so you can make changes. Once you are done making changes you will need to submit the competed competency to your validator for review.
10. I am using the Competency System to report my competencies and I want to add a new Validator but the system will not allow me to add his/her name. How can I have the name added?
Please send an email to
and provide the full legal name of the Validator and their current email address and we will add the validator to your list.
11. I am applying for GIT/PGeo and I completed a degree outside of Canada that does not completely match the required courses on the syllabus, how do I fill out these documents?
The checklist should be completed to the best of your ability. APEGBC will accept an addendum that will need to accompany your checklist that can include, courses you have completed that do not cover areas outlined on the checklist, information on any courses you feel cover more than one of the required topics and any further information regarding your program structure if it differs from the equivalent Canadian degree.
If you have completed degrees or courses in multiple academic institutions you will need to send all transcripts claimed against the syllabus requirements to APEGBC as part of your application process.
12. I am required to submit a Self-Evaluation Checklist for my GIT/P.Geo application. However, the syllabi or educational institution course equivalency list that I need is not provided. How can I ensure that I meet this requirement and complete a Self-Evaluation Checklist correctly?
APEGBC has developed institution-specific course equivalency lists for BC universities. Course codes are subject to change so if you have completed a course that is equivalent but has a different course code please add this information to your completed syllabus. A course can only be used once on the checklist. At this time, only equivalency lists for the disciplines of geology and environmental geoscience have been developed.
If you attended a post-secondary institution outside of BC or are a geophysics applicant, please use one of the checklists listed under
General Syllabi and Geophysics Syllabus
. Checklists assist in the academic review of your application. The course code for each corresponding topic on the list must match what is listed on your transcript(s). A course can only be used once on the checklist.
13. When I applied for membership in APEGBC I paid an application fee. Did that fee include membership for the year?
The annual membership fee is not included in your application fee. Once you are registered you will be invoiced for a one time membership fee and an annual membership fee. As APEGBC memberships run on the calendar year your annual membership is prorated to the month of registration or enrolment. Complete fee information is available on our
14. I am doing engineering work and there are no professional engineers or professional geoscientists to supervise my work. What can I do to comply?
APEGBC recognizes that the availability of professional supervisors is industry, project and company-dependant and is sympathetic when applicants for membership have difficulty finding appropriate professional supervisors for their engineering or geoscience work. In order to comply with the
Engineers and Geoscientists Act
and to obtain acceptable experience for registration, you should:
ask your employer to engage the services of a BC registered professional engineer (or geoscientist) in your discipline to provide regular oversight and to take professional responsibility for your work. This will be a definite asset when counting your experience towards registration. It also allows your employer to comply with the
Engineers & Geoscientists Act;
Consider asking for supervision from BC registered professional engineers (or geoscientist) who are affiliated with your employer and who either have detailed knowledge of your work, or can review your work on a regular basis. This can include branches of your company in other provinces, research associates in academia, subsidiaries, etc;
Seek out the support of professional engineer (or geoscientist) clients or colleagues who have a detailed knowledge of your work and ask them to act as referees;
Consider asking for a secondment (i.e. a temporary transfer to another job) with an affiliated company, or a client that has BC registered professional engineers (or geoscientists) who can supervise your work; and/or
Seek new professionally-supervised employment as soon as the opportunity arises.
15. What is the Accredited Employer Member-in-Training Program?
APEGBC has partnered with engineering companies that employ Engineers-in-Training (EITs), and have work environments where EITs are able to satisfy the 34 key competencies in the APEGBC
to develop an accredited employer program.
Employers are responsible for developing an internal EIT training program and applying to APEGBC to have it accredited. EITs participating in the program have their application expedited through the low-risk pathway to professional registration based on their employers’ recommendation.
P.Eng. applicants who wish to be considered for the program and would like be fast-tracked must be employed by and enroll through an accredited employer. To be eligible, applicants must also hold or have held an EIT membership with APEGBC and have been working on engineering projects with the accredited employer for a minimum of
years. If your company is not accredited, have your employer contact
for more information.
More information about the program and the list of current accredited employer partners can be found on our
16. I am a previous member, how do I reactivate my membership with APEGBC?
Previous members can choose to reinstate their membership (membership without active licensure) or to resume their practice rights (membership with active licensure). Previous MIT are required to resume their membership through reinstatement as MIT membership does not include active licensure to practice. Information can be found on our
17. I can’t find my question on this list
All application requirements and guidelines can be reviewed via our
Become a Member Page
Specific questions regarding the registration process can be emailed to
Other FAQ information can be found at:
Professional Practice FAQ
Professional Development FAQ
Terms & Conditions
© 2017 APEGBC
APEGBC - Professional Engineers and Geoscientists of BC
Do you have a question regarding registration?
Visit our FAQ page
View the full listing of fees.
See the full list of application forms to become a member.
Academic exam information and past exams.
Competency Experience Reporting
Group presentations are available for interested employers. Please contact
for more information.
Registration Consultation Desk
Hours: Mon-Fri 8:30am - 4:30pm
In-Person registration consultations are by appointment only:
Request a Consultation Appointment Now >
See the full list of discounts and benefits offered through the APEGBC Affinity program.